通孔玻璃材料的研制

研究了利用废旧玻璃用松装烧结和模压烧结方法生产通孔材料的可能性，以及原始粉末尺寸、烧结工艺和造孔剂添加量对通孔材料的密度和孔隙度的影响。实验结果表明，用废旧玻璃经松装烧结或模压烧结后可制得通孔材料；松装烧结时，随烧结温度提高，烧结保温时间延长，原始粉末粒度变细，烧结后通孔材料的密度增大，而孔隙度降低；模压烧结时造孔剂的最佳百分含量为５％～５０％，且通孔材料随造孔剂的百分含量增加，密度降低，孔隙度增大。     

杭州城市交通拥挤现状及对策

在分析杭州市交通供需现状的基础上,提出了规划多中心结构和混合功能区,以减少不必要的出行以及合理配置交通源,并对改善中心区交通提出切实可行的对策。     

一种改进的基于密度和网格的高维聚类算法

提出了一种改进的基于密度和网格的高维聚类算法,并对算法有效性进行了验证.该算法通过减少样本点数量的方法达到减少稠密子空间数量.在发现高维稠密子空间时,对样本库进行精简.这些样本点的求得能有效减少求解最小聚类的时间复杂度.     

永磁同步电机不同工况下定转子铁耗分析

永磁电机在不同的工况下产生的铁耗大小不尽相同.采用采样得到的驱动器供电下永磁电机实际电流作为激励,对电机进行二维有限元计算,分别获得了工作于空载、最大转矩电流比控制及弱磁不同工况下的磁密波形,进而计算铁耗.分别计算了12槽8极(分数槽)的试样永磁电机及24槽8极(整数槽)电机工作在不同工况下铁耗.通过二者比较分析铁耗产生的原因,经过与试验对比,结果表明该计算方式有较高的准确性,可以用于分析电机铁耗产生的原因及指导高效率电机的设计.     

电源频率对三相交流异步牵引电动机影响的探讨

通过对三相异步牵引电动机的特点,结构,参数的分析,结合异步动机用于机车做为牵引动力的特定工况,提出了在同一转差率下,低频区电动机输出转矩下降,机械特性变软的问题,从理论上分析了问题产生的原因,并针对这两个问题提出了作者的看法。     

Uncertain demand,modal competition and optimal price-capacity adjustments in air transportation

A new microeconomic model for the operation of an airline facing modal competition with uncertain total demand is developed to analyze optimal price capacity combinations. The novelty is the treatment of the capacity restriction, which is not viewed as affecting negatively individual preferences (e.g. probability of a full flight), but does influence aggregate utility. A mode choice model is used to represent unrestricted individual preferences assuming full availability (phone call demand); air capacity is treated as a variable that acts on the actual choice set. Restricted choices and total demand stochasticity are integrated in welfare calculations (users' benefits and profits). Numerical examples are given and results are analyzed in terms of load factors fare levels, and sensitivity to the stochasticity of requests.This research was partially funded by FONDECYT, Chile, Direction Génerale de l'Aviation Civile, France, the Andes Foundation and the Fulbright Commission.     

沥青混合料最大理论密度的计算

通过对矿质集料的物理状态及其在混合料中存在方式进行分析,探讨了沥青混合料最大理论密度计算中矿料密度的引用及其影响.     

水泥稳定砂砾基层干缩裂缝原因浅析

沥青路面早期裂缝是常见且易发生的病害之一,针对水泥稳定砂砾基层干缩裂缝原因进行了探讨,提出了防治措施,并结合工程实践总结了施工中应该注意的事项.     

沥青路面破损程度分级与破损换算系数取值的探讨

本文分析现行规范中对沥青路面破损程度、密度分级以及破损换算系数取值中存在问题,通过分析沥青路面破损程度与路面使用状况关系,结合沥青路面养护措施,提出沥青路面裂缝破损密度分级的方法,并对车辙破损严重程度分级标准、裂缝和车辙破损换算系数的修正值提出建议。     

Aggregating mobile object trajectories: cumulative time geographic density estimation for GPS data

We present new approaches that expand upon the time geographic density estimation (TGDE) framework previously employed to estimate potential path trees. In the past, TGDE metrics have identified possible locations an individual moving object may have passed between, given known origin and destination points. This paper utilizes a new form of TGDE to investigate taxicab GPS traces over a specified time horizon with position ‘gaps’. To this end, we propose a new extension to the TGDE framework, TGDE-C, which is used to determine the cumulative TGDE values for a group of GPS traces, at a given location. These metrics are applied to multiple taxis and allow for time of day analysis. Additionally, we combine these new extensions with existing TGDE metrics that allow us to determine how accessible individual or groups of vehicles are to urban opportunities.